Magic-Pak 60MGE8-12-241NP 60k Btu Gas Heat 2 Ton Cooling

Magic-Pak 60k Btu Gas Heating 2 Ton Electric Cooling. Gas Heating/Electric Cooling

Standard Features:

Electrical Connections and Guage Ports:

• Line voltage knockouts (two concentric) to accommodate field required wire size.

• Thermostat connections are located at the top of the cabinet .

• Two gauge ports are located within the lower compartment of the unit.

• Refer to Unit Dimension figure for additional details.

Cabinet:

• Embossed galvanized steel cabinet. 

• Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation.

• Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation.

Internal Filter:

• Tool-less filter access.

• Factory-installed 1 in. filter rack with washable filter.

• Field-supplied filters up to MERV 6 can typically be installed in the filter slot internal to unit in lieu of washable filter, when proper duct design is applied.

• If a higher resistance filter is field installed in the unit, the added resistance must be included in the external static pressure and must not exceed 0.5 in. w.c. including ductwork.

• Refer to Factory Filter Size and Pressure Drop and Blower Performance tables for additional details

Specifications:

• Fully ducted system

• 0.75-, 1-, 1.5-, 2-, 2.5- and 3-ton

• 15,000, 24,000, 36,000, 48,000 and 60,000 BTUH

• Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 80% AFUE

• Individual metering and control for each unit

• Easy plug-and-play-like install and service

• Top supply and return

• Nominal CFM at 0.5” W.C.

• <2.0% cabinet air leak

• Pre-wired and pre-charged

• Factory installed evaporator drain float switch

• Direct vent/sealed combustion

• Standard stainless steel heat exchanger

• Dimensions: 59 7/8″ H 24 3/8″ D 28 W.

• Weight: 301 lb.

Warranty;

• 5-year limited warranty on all parts.

• 20-year warranty on stainless steel heat exchanger.