Description
Magic-Pak 60k Btu Gas Heating 2 Ton Electric Cooling. Gas Heating/Electric Cooling
Standard Features:
Electrical Connections and Guage Ports:
-
Line voltage knockouts (two concentric) to accommodate field required wire size.
-
Thermostat connections are located at the top of the cabinet .
-
Two gauge ports are located within the lower compartment of the unit.
-
Refer to Unit Dimension figure for additional details.
Cabinet:
-
Embossed galvanized steel cabinet.
-
Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation.
-
Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation.
Internal Filter:
-
Tool-less filter access.
-
Factory-installed 1 in. filter rack with washable filter.
-
Field-supplied filters up to MERV 6 can typically be installed in the filter slot internal to unit in lieu of washable filter, when proper duct design is applied.
-
If a higher resistance filter is field installed in the unit, the added resistance must be included in the external static pressure and must not exceed 0.5 in. w.c. including ductwork.
-
Refer to Factory Filter Size and Pressure Drop and Blower Performance tables for additional details
Specifications:
-
Fully ducted system
-
0.75-, 1-, 1.5-, 2-, 2.5- and 3-ton
-
15,000, 24,000, 36,000, 48,000 and 60,000 BTUH
-
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 80% AFUE
-
Individual metering and control for each unit
-
Easy plug-and-play-like install and service
-
Top supply and return
-
Nominal CFM at 0.5 W.C.
-
<2.0% cabinet air leak
-
Pre-wired and pre-charged
-
Factory installed evaporator drain float switch
-
Direct vent/sealed combustion
-
Standard stainless steel heat exchanger
-
Dimensions: 59 7/8″ H 24 3/8″ D 28 W.
-
Weight: 301 lb.
Warranty;
-
5-year limited warranty on all parts.
-
20-year warranty on stainless steel heat exchanger.
Magic-Pak 60k Btu Gas Heating 2 Ton Electric Cooling. Gas Heating/Electric Cooling
Standard Features:
Electrical Connections and Guage Ports:
-
Line voltage knockouts (two concentric) to accommodate field required wire size.
-
Thermostat connections are located at the top of the cabinet .
-
Two gauge ports are located within the lower compartment of the unit.
-
Refer to Unit Dimension figure for additional details.
Cabinet:
-
Embossed galvanized steel cabinet.
-
Indoor section of the cabinet insulated with 0.5 in. dual density fiberglass insulation.
-
Outdoor section of the cabinet insulated with 0.5 in. weather-resistant polystyrene insulation.
Internal Filter:
-
Tool-less filter access.
-
Factory-installed 1 in. filter rack with washable filter.
-
Field-supplied filters up to MERV 6 can typically be installed in the filter slot internal to unit in lieu of washable filter, when proper duct design is applied.
-
If a higher resistance filter is field installed in the unit, the added resistance must be included in the external static pressure and must not exceed 0.5 in. w.c. including ductwork.
-
Refer to Factory Filter Size and Pressure Drop and Blower Performance tables for additional details
Specifications:
-
Fully ducted system
-
0.75-, 1-, 1.5-, 2-, 2.5- and 3-ton
-
15,000, 24,000, 36,000, 48,000 and 60,000 BTUH
-
Up to 14.0 SEER/13.4 SEER2, 11.0 EER/10.6 EER2 and 80% AFUE
-
Individual metering and control for each unit
-
Easy plug-and-play-like install and service
-
Top supply and return
-
Nominal CFM at 0.5 W.C.
-
<2.0% cabinet air leak
-
Pre-wired and pre-charged
-
Factory installed evaporator drain float switch
-
Direct vent/sealed combustion
-
Standard stainless steel heat exchanger
-
Dimensions: 59 7/8″ H 24 3/8″ D 28 W.
-
Weight: 301 lb.
Warranty;
-
5-year limited warranty on all parts.
-
20-year warranty on stainless steel heat exchanger.